3M™ Fastbond™ Contact Adhesives
3M™ Fastbond™ adhesives remain one of the most reliable ranges when you need fast, secure and environmentally friendly bonds. They are all water-based, low-odour, non-flammable when wet and GREENGUARD certified, making them ideal for indoor use and sustainable projects.
Detailed Applications: 3M™ Fastbond™ Contact Adhesives
30NF Fastbond™
The versatile classic. Ideal for bonding plastic foams, laminates, wood, plywood, veneers and canvas. It is applied to both surfaces, allows for repositioning for several hours and withstands subsequent heat well. Widely used in the manufacture of furniture, doors and decorative panels.
49 Fastbond™
Insulation specialist. Designed to bond lightweight materials such as fibreglass, felt or paper to metal or other surfaces. Provides immediate tack when applied to just one side. Ideal for HVAC installations and acoustic and thermal insulation in the construction industry.
2000NF Fastbond™
For fast and strong bonding. A two-component adhesive that provides immediate bonding without the need for prolonged clamping. Recommended when production time is critical and maximum strength is required from the outset.
1100NF Fastbond™
Expert in foam and upholstery. A water-based contact adhesive specially formulated for bonding foam, fabrics and lightweight materials in upholstery, headboards, vehicle panels and furniture. It offers good initial tack, a strong bond and heat resistance. It can be applied to one or both sides and is available in a spray can, making it very practical for workshops.
1049 Fastbond™
A fast-drying, high-solids pressure-sensitive adhesive. Designed for permanent bonding of lightweight materials where low VOC emissions and good adhesion are required, without the need for immediate strong bonding. Suitable for industrial assembly applications where aggressive tack and low odour are required.
Technical Specifications Comparison Table
| 30NF | 2000NF | 1100NF | 1049 | 49 | |
| Main type | Water-based contact adhesive (double-sided) | Two-component contact activated | Contact for foams and fabrics | Pressure-sensitive adhesive (single-sided) | Pressure-sensitive adhesive (single-sided) |
| Open-joint curing time | 4h | Immediate | 30 min | Not applicable (up to 60 minutes to position) | Not applicable (permanent tack after drying) |
| Time to touch-dry | 10 – 30 min | 5 – 15 seg | 5 – 10 min | 15 min | 0 – 10 min |
| Approximate coverage | 17 m²/L | High (~17 m²/L with activator) | 11-12 m²/L | High (high solids) | 20 m²/L |
| % Solids | 47 – 51 % | 47 – 51 % | 47 – 52 % | 49 – 51 % | 53 – 57 % |
| Heat resistance | 82 – 92 ºC | 107 ºC | 149 ºC | 88 ºC | 160 ºC |
| VOC | Very low (37 g/L) GREENGUARD Non-flammable when wet | Low (<80 g/L) Non-flammable when wet | Very low (<10 g/L) | Very low (<10 g/L) | Extremely low (<5 g/L) GREENGUARD |
| Main application | Laminates, wood, foam, veneers, decorative panels | High-speed, high-performance industrial bonding | Flexible foams, fabrics, upholstery, headrests, vehicle panels | Permanent fastening of lightweight materials, insulation and construction | Lightweight insulation (glass fibre, felt, mineral wool) |
Other adhesives
- 3M™ Spray Adhesives and Lubricants
- 3M™ Scotch-Weld™ Epoxi Adhesivos Estructurales (DP8005 – DP490)
- 3M™ Scotch-Weld™ Epoxi Adhesivo Estructural DP460
You’ll find other interesting adhesive products in our online shop.